Legends Grain Filler And Cue Restorer

Description

Legends Grain Filler & Cue Restorer

Legends Grain Filler is designed for easy application; it will fill the grain correctly and highlight the grain’s natural arrows and grain lines of any Ash cue shaft.

Instructions:

To ensure Legends Grain Filler is applied correctly, please follow the following guidelines:

1. Make sure the area is clear/clean of any lacquer or finishing products.
2. It is important to “open” the grain and prep the wood correctly for the Legends Grain Fillers to work effectively.
3. Opening the grain can be done with a small, fine, brass bristle brush; rubbed lightly over the cue grain.
4. Using a small soft cotton cloth, apply small amounts of Legends grain filler to the required area of the cue shaft. Make sure the grain is fully filled.
5. After 30 seconds, rub away the excess fillers with a new cotton cloth. Repeat steps 4-5 if you require a darker finish.
6. With super fine 0000 grade wire wool, very lightly remove excess filler and leave clean and smooth before you apply your preferred Finish.

Safety notes:

• Protective gloves are recommended, steps should be taken to minimize skin contact. If this happens, please clean immediately with suitable solvent based or specialist cleaners. Do not use water!
• If you feel unwell or develop a skin reaction, please seek medical advice.